Even if the buyer does not need to install it themselves, it is still good to understand it.
Knowledge of installation process for reaction pot
1. The reaction pot should be installed on a sturdy and flat workbench, and the height of the workbench should be determined according to the usage situation. There should be a certain space around the equipment and workbench
(>360cm)， For installation and later maintenance.
2. During installation, it is required that the transmission shaft be perpendicular to the ground level, and the non perpendicularity (inclination) should not exceed 1/1000 of the total height of the reaction pot.
3. The self-contained components and safety valves on the various process connections of the reaction vessel must be equipped according to the requirements of the reaction vessel.
4. After installation, check whether all connecting components and transmission parts are firm and reliable. Conduct air tightness tests on all connecting pipes, pipe openings, seals, and the entire machine, and there should be no bubbles, bubbles, drips, or leaks.
5. Before starting up, inject 46 # mechanical oil into the reducer. Open the motor protective cover and manually rotate the fan blades to check for any jamming or scraping of the mixing blade. Clean the dirt inside the kettle before starting up. Only after 30 minutes of empty operation without any abnormal noise or vibration, can the material be officially put into production. Regularly replace the reducer oil of the reaction vessel depending on the production situation.
English
