Firstly, before using the semi-automatic filling machine.
1. Install and debug, it is necessary to carefully read the instructions and prepare things before adjusting.
After the installation of the loader, bottle washer, and washing machine, they are in good condition. The additional tracks will be added, and the bottles will be set horizontally. The storage tank will be filled with materials, and all electrical switches will be in the off position.
Fill 3 containers and insert them into the storage box. Connect the external power supply to a power socket. The power socket must be a tripod socket with reliable grounding. In case of leakage into the receiver, turn on the power switch and the power indicator light will be on.
4 rack support plate support, pointing towards the top of the movable filling head positioning sleeve, the positioning sleeve should move up and down sensitively, and the filling needle should be exposed or retracted without obstruction.
Move the storage tank under switch 5 to the open position to allow the material to flow into the main metering pump. Adjust the crank screw and knob to set the disc speed to 20 degrees according to the filling amount of each container. Then turn the filling speed plate of the switch to the open position.
6 liquid filling head, when adjusting the amount of liquid and adjusting the number of nuts, cover the filling head shell and loosen the packing frame support plate.